Most reported Brother issues
Guides for Brother owners
Fix a printer that keeps showing offline
An offline status almost always means your computer lost the network path to the printer, not that the printer is broken.
5 min readConnect any printer to Wi-Fi in 5 minutes
Most wireless setup failures come from a 5 GHz network or a mistyped password, not the printer.
8 min readClear a paper jam without damaging the rollers
Pull paper in the direction of travel and always check the duplex unit at the back.
9 min readInstall or repair a printer driver cleanly
A half-removed old driver blocks the new one. Remove the package, not just the printer icon.
12 min readSet up a brand new printer from the box
Remove every shipping lock, load paper before the first alignment, then connect.
5 min readBrother 'Drum End Soon' and drum replacement
The drum is separate from the toner on Brother lasers. Replace it and reset the counter correctly.
5 min readPrinter won't connect to Wi-Fi: the 5 GHz problem
If setup fails instantly every time, your printer is almost certainly trying to join a 5 GHz network it cannot see.
7 min readPaper jam error that won't clear
No paper visible but the jam error stays? A torn scrap or a stuck sensor flag is almost always the cause.
5 min readPrinter printing very slowly: speed it up
Slow printing is usually a quality setting, a USB 1.1 port, or bidirectional status traffic — all easy fixes.
8 min readScanner not detected on a multifunction printer
Printing works but scanning fails? The scan driver and firewall are separate from the print driver.
6 min readPrinter keeps going offline on a Mac
macOS loses printers when their IP changes. A reservation and the right protocol fix it for good.
6 min readComputer doesn't recognise the printer over USB
A printer that is invisible over USB is usually a cable, port or driver problem — in that order.
6 min readFaded or light prints: toner and ink fixes
Faded output is almost always low toner, economy mode or a dirty drum — rarely a dead printer.
7 min readPrint spooler keeps stopping on Windows
A crashing spooler is almost always a corrupt job or a bad driver. Clear both and it stays up.
5 min readAirPrint not finding your printer on iPhone or iPad
AirPrint needs the phone and printer on the same network with Bonjour allowed. Guest networks break it.
6 min readPrinter won't pick up paper from the tray
No-pickup faults come from dusty rollers, overloaded trays or curled paper — all fixable at home.
7 min readVertical streaks and lines on laser prints
Lines down the page point to the drum, the toner or the fuser. The line's colour tells you which.
5 min readAdd a printer to a Chromebook
ChromeOS prints over the network with no drivers. The printer just needs to be on the same Wi-Fi.
6 min readDuplex printing jams or prints upside down
Duplex faults are usually the wrong flip setting, damp paper or a duplex unit that is not clicked in.
Ask HUB AI about your Brother
HUB AI
Free printer troubleshooting assistant
Describe what your printer is doing and HUB AI will walk you to the fix.